Detailing equipment · Australia
Since 2016 BigBoi has designed the equipment detailers use every day: touchless drying with heated filtered air, commercial vacuuming with HEPA, induction pressure washers tuned for foam and rinsing, and spot-free water. A system, not loose parts.
Designed in Australia
By detailers, since 2016
Heated filtered air
Drying without towels or scratches
2-year warranty
Parts and service by BestQuímica
Exterior
Wash with controlled pressure, dry without contact and rinse with mineral-free water. Each unit was designed to work with the next.
Controlled pressure and high flow: that is what separates a detailing washer from a driveway washer. The WashR units were tuned to foam well, rinse fast and never harm paint, coatings, wheels or trim.
Pressure washer tuned for detailing: brushless induction motor, 1150 psi and 6.3 L/min for foam and rinsing with control.
Self-priming: it can work from a bucket or tank, as well as mains water.
Accessories and consumables
Compact pressure-washer kit with a 4-plunger pump: 1050 psi and 7.45 L/min, Total Stop System and FoamR PRO+ cannon included.
For enthusiasts and light professional use; for intensive daily work, WashR PRO.
Accessories and consumables
The reference washer for detailers: 2000 W induction motor, Italian forged-brass triplex pump, 1850 psi and 9.5 L/min, 80 dB and fully serviceable.
Fixed wall installation or mobile, with optional mounts and reels.
Accessories and consumables
Foam cannon with patented 3-way spray technology (vertical, horizontal and jet), wide 1 L bottle and soap control knob.
G14 ¼" quick connection for the whole WashR range.
Manufacturer specs side by side. Click a name for the full page.
| Specification | WashR FLO MKIIEnthusiast | WashR QuadGarage | WashR PRO MKIIProfessional |
|---|---|---|---|
| Motor | 1600 W indução sem escovas | 1600 W com escovas | 2000 W indução sem escovas |
| Pressure | 1150 psi | 1050 psi | 1850 psi (afinada 1450) |
| Flow | 6,3 L/min | 7,45 L/min | 9,5 L/min |
| Noise | 88 dB | — | 80 dB |
| Hose | 13 m entrançada em aço | — | 13 m entrançada em aço |
| Max. water | 60 °C | — | — |
| Pump | — | Quad, 4 pistões | Triplex latão forjado |
| TSS | — | Sim | — |
| Store | View in store | View in store | View in store |
Touchless drying with heated, filtered air: water leaves panels, wheels, mirrors, grilles and badges without a towel dragging dirt. Fewer swirls, fewer spots and up to 80 % less time.
The entry-level dryer: 1000 W and 200 km/h of heated, filtered air to dry without touching the paint.
Ideal for anyone replacing towels with touchless drying, at home or on the road.
Accessories and consumables
Compact single-motor dryer with adjustable speed and temperature and a 5 m hose: fast, scratch-free drying for cars and motorcycles.
Accessories and consumables
Two 1400 W motors, up to 275 km/h, 3 wind levels and adjustable heat 15 to 40 °C above ambient. Wall-mountable.
For demanding enthusiasts and lower-volume detailers.
Accessories and consumables
Two motors and 450 km/h of heated, filtered air for detailing workshops with volume, without remote.
Accessories and consumables
The most powerful BigBoi dryer: 2 × 1600 W, 450 km/h, 4 wind levels, remote control and air heated up to 20 °C above ambient.
Cuts drying time by up to 80 %: bodywork, wheels, mirrors, grilles and trim without a towel.
Accessories and consumables
Manufacturer specs side by side. Click a name for the full page.
| Specification | BlowR BuddiCompact | BlowR MiniEnthusiast | BlowR Mini+Twin motor | BlowR PROProfessional | BlowR PRO+ MKIIFlagship |
|---|---|---|---|---|---|
| Motor | 1000 W | 1 motor | 2 × 1400 W | 2 motores | 2 × 1600 W |
| Speed | 200 km/h | — | 275 km/h | 450 km/h | 450 km/h |
| Flow | 19 680 ft/min | — | 58 600 ft/min | — | 62 200 ft/min |
| Noise | 78 dB | — | 81 dB | — | 81 dB |
| Control | Ligar/desligar | Velocidade e temperatura | 3 níveis | — | 4 níveis + comando |
| Hose | — | 5 m | 5 m | 9 m | 9 m |
| Air | — | Aquecido e filtrado | — | Aquecido e filtrado | — |
| Heat | — | — | — | — | até +20 °C |
| Store | View in store | View in store | View in store | View in store | View in store |
In hard-water areas, a final rinse with deionised water ends limescale spots and buys time before drying. The D-IonizR measures TDS continuously and only filters when needed.
Deionising filtration for the final rinse: 0 ppm water, no limescale spots and less drying.
Digital TDS meter and bypass valve: filter only the final rinse and save resin.
Accessories and consumables
Three stages: composite carbon filter and two resin cartridges for frequent washing, with continuous TDS and bypass.
Carbon reduces hardness before the resin and extends the cartridges by up to 20 %.
Accessories and consumables
Manufacturer specs side by side. Click a name for the full page.
| Specification | D-IonizR 1 Set MKIII | D-IonizR 2 Set MKIIIHigh capacity |
|---|---|---|
| Resin | 1 cartucho | — |
| Capacity | ≈ 1500–1900 L por cartucho | — |
| TDS | Medidor digital | Entrada e saída |
| Bypass | Sim | Sim |
| Stages | — | 3 (carbono + 2 resinas) |
| Water | — | até 0 ppm |
| Store | View in store | View in store |
Interior
Vacuum with commercial suction and HEPA, extract fabrics without a dedicated machine and see what normal light hides.
Wet/dry vacuums designed for car interiors: commercial suction, HEPA filtration, wireless remote and the right tools for consoles, crevices, seats and pet hair.
1400 W, 22 kPa wet/dry vacuum with HEPA filter, 20 L dry and 5 L wet, wireless remote and 5 m hose.
Accessories and consumables
Professional wet/dry vacuum: 1600 W, 22 kPa, 30 L dry and 14 L wet, HEPA with or without bag, remote and lockable wheels. XtractR ready.
Accessories and consumables
Twin-motor commercial vacuum for workshops and premium garages: maximum suction, 10 m hose, integrated reel, HEPA and remote. Mobile version with trolley or wall-mounted.
Accessories and consumables
Manufacturer specs side by side. Click a name for the full page.
| Specification | SuckR MiniCompact | SuckR PROProfessional | SuckR PRO+Twin motor |
|---|---|---|---|
| Motor | 1400 W | 1600 W | 2 motores |
| Suction | 22 kPa | 22 kPa | — |
| Capacity | 20 L / 5 L húmido | 30 L / 14 L húmido | — |
| Filter | HEPA | HEPA | HEPA |
| Hose | 5 m | 5 m | 10 m |
| Remote | Sim | — | Sim |
| Flow | — | 40 L/s | — |
| Type | — | — | Seco / húmido |
| Store | View in store | View in store | View in store |
Deep cleaning of fabrics, mats and carpets: spray, brush and extract with the same vacuum, without a dedicated machine.
Turns the SuckR PRO into a 3-in-1: 4.5 L tank, 3 bar pump, 5 m hose with extraction function, spray/vacuum remote and clear tools.
Includes 3 drill brushes; the SuckR PRO is sold separately.
Compact upholstery extraction for seats, mats and carpets.
Good light is half the finish: paint inspection, defect revealing and work in dark interiors.
Head lamp for paint inspection and hands-free interior work.
Hand lamp to reveal swirls, holograms and residues before polishing or sealing.
Who already uses it
13
orders with BigBoi in the last 30 days
22
BigBoi units sold in the last 30 days
Equipment maintenance
BigBoi units are made to be maintained, not replaced. Eight simple steps, from the dryer filter to the pump oil, keep the warranty and the performance.
The sponge filter is washable: wash it when dirty, let it dry completely and never fit it damp. Do not extend or modify the hose; 5 and 9 m versions exist. BlowR units are not waterproof: store them dry.
Empty and rinse the tank after vacuuming liquids. Change the bag when suction drops and check the HEPA filter; always use original parts to keep the filtration.
Non-detergent pump oil (SAE 10W-30 or 15W-40, API SF or higher) at the first 30 hours and then every 100. Heavy-duty extension lead up to 15 m and never on power boards. The D-IonizR is changed when the outlet TDS rises.
Why BigBoi
Founded in 2016 by a detailer, BigBoi is now in Australia, the UK, Europe and the USA. Official partner of the Porsche Carrera Cup Australia.
Air heated up to 20 °C above ambient and filtered: water leaves without a towel, without scratches and without spots, up to 80 % faster.
Controlled pressure with high flow, Total Stop System and serviceable pumps: washers that care for the paint instead of wearing it.
Washer, foam cannon, dryer, vacuum, extraction and deionised water made to work together, with mounts and trolleys for any garage.
BigBoi garage
Four setups designed by volume and space: request a quote with the equipment already chosen, add everything to the cart or see it in the store.
Wash, dry and vacuum without towels or compromises: the trio for anyone starting seriously.
The fixed installation for daily volume: WashR PRO, BlowR PRO+ MKII and SuckR PRO+ with wall mounts.
Compact and portable to work at the customer’s place: Buddi, SuckR Mini and WashR Quad.
Deionised water in the rinse and hot-air drying: the end of limescale spots.
Configurator
Three questions and we suggest the equipment and accessories for your operation. Then request the pre-filled quote or look at each product.
Our suggestion
WashR Quad1600 W com escovas · 1050 psiBlowR Mini+2 × 1400 W · 275 km/hSuckR PRO1600 W · 22 kPa+ Suporte de parede BlowR Mini / Mini+, Filtro HEPA SuckR Pro HPI
Why: Between 20 and 80 cars a month it pays to move to twin motors and induction: less time per car and longer life. Fixed setup: wall mounts and hose reels free the floor and keep the hose at hand.
Consumables
Tell us how many cars you treat per month and the average size. We estimate bags, filters and resin for your BigBoi equipment and how many packs to order per year. Indicative values: we adjust them in the quote.
Estimate
| Consumable | Usage | To order / year |
|---|---|---|
| SuckR Pro+ paper bag | 1.6 bag/month | 20× bag |
| SuckR Pro+ sponge filter | 1 filter every 8 months | 2× filter |
| SuckR Pro+ HEPA filterevery 6 months in normal use | 1 filter every 15 months | 1× filter |
| D-IonizR resin cartridge≈ 40 L of final rinse per car, 1,700 L per cartridge | 1 cartridge every 1 months | 12× cartridge |
| D-IonizR carbon cartridge | 1 cartridge every 3 months | 4× cartridge |
Basis: 1 SuckR bag per 25 cars, HEPA filter every 600 cars (≈ 6 months in normal use), sponge filter every 300, D-IonizR resin at 1,700 L per cartridge with ≈ 40 L of final rinse per car, carbon at 5,000 L. Indicative averages, not official manufacturer data.
Request a quote with these consumablesUsing other equipment today?
Type the kind of equipment you use today (e.g. “car dryer”, “vacuum”, “pressure washer”) and see the BigBoi model that replaces it.
Car dryer / blower
Wet / dry vacuum
Pressure washer
Foam cannon
Deionised / spot-free water
Upholstery extractor
Frequently asked questions
What detailers ask us most often about dryers, washers, vacuums and deionised water.
Yes. Touchless drying with heated, filtered air removes the towel that drags dirt across the paint. It is safe on paint, glass, wheels, chrome and fabric roofs, and also on wraps, matte, satin and ceramic coatings when used correctly.
Most models use bigboi Temperature Technology: air up to 20 °C above ambient, fixed or adjustable depending on the model. All have a built-in washable filter that keeps dust and particles away from the surface you are drying.
PRO+ MKII for high-volume professional use (450 km/h, 55 mm hose, remote, 4 levels); PRO for workshops that do not need a remote; Mini+ for demanding enthusiasts and lower-volume detailers (twin motors, adjustable heat); Mini compact with one motor and a 5 m hose; Buddi as the entry into touchless drying.
No. The hose must not be extended or modified; 5 and 9 m versions exist depending on the model, and the 9 m is the one recommended for a wall installation with a reel.
Yes, because they remove the water quickly. In hard-water areas the manufacturer recommends pairing the dryer with a D-IonizR for the final rinse.
The PRO is for professional detailers and extended commercial use (2000 W induction, brass triplex pump, 1850 psi, 9.5 L/min, serviceable). The Quad suits enthusiasts and light professional use (4-plunger pump, 1050 psi). The FLO is the entry point for enthusiasts, with induction and self-priming. For full-time commercial work, PRO.
Only the WashR FLO is self-priming and can use a bucket or tank. PRO, Quad and DUO must connect to pressurised mains water.
A heavy-duty, thick-gauge extension lead up to 15 m, plugged directly into the wall socket: never into power boards. The FLO uses a 10 A heavy-duty lead.
Non-detergent pump oil (API SF or higher), SAE 10W-30 or 15W-40 depending on climate: change at the first 30 hours and then every 100. Never automotive engine oil with detergent.
Between 1,500 and 1,900 litres per cartridge, depending on water hardness. The digital TDS meter shows the outlet water quality and tells you when to change the resin; the bypass valve lets you filter only the final rinse and save resin.
Two-year manufacturer warranty, with service and original parts by BestQuímica in Portugal. Keep the invoice and serial number; most support requests are solved with the support guides without a claim.
From our blog
BestQuímica articles about this brand’s products: how to choose, how to use and what to keep in mind.
4 min read
Descubra como escolher o soprador perfeito para secar veículos, evitando riscos e manchas. Um guia prático para profissionais do detalhe automóvel.
Read the article
4 min read
Descubra qual tipo de motor é mais adequado para as suas necessidades de limpeza automóvel e industrial, considerando durabilidade, ruído e desempenho.
Read the articleTrade quote
Detailers, workshops, dealerships and car-wash centers: tell us the space, the monthly volume and what you already have. We reply with trade prices, installation and service.
